Ultralow-Power NTSC/PAL/SECAM Video Decoder

-Accepts NTSC (J, M, 4.43), PAL (B, D, G, H, I, M, N, Nc), and SECAM (B, D, G, K, K1, L) Video

-Supports ITU-R BT.601 Standard Sampling 

-High-Speed 9-Bit Analog-to-Digital Converter(ADC)

-Two Composite Inputs or One S-Video Input

-Fully Differential CMOS Analog Preprocessing Channels With Clamping and Automatic Gain Control (AGC) fo

330MHz 3-channel 10-bit high-speed video DAC chip

- maximum conversion rate 330MSPS
- 3 10-bit DAC
- Input compatible with TTL level
- DAC output current range of 2mA ~ 26mA
- LQFP48 package

- Triple 10-Bit High Speed Video DAC

- 330 MSPS throughput

- Compatible with a wide variety of high resolution colorgraphics systems, including RS-343A and RS-170

- 48-Lead LQFP Package

- Single-Supply 5 V/3.3 V Operation

CMOS, 330 MHz Triple 10-Bit High Speed Video DAC

330 MSPS throughput rate

Triple 10-bit digital-to-analog converters (DACs) SFDR

     −70 dB at fCLK = 50 MHz; fOUT = 1 MHz

     −53 dB at fCLK = 140 MHz; fOUT = 40 MHz

RS-343A-/RS-170-compatible output

Complementary outputs

+3.3V Programmable LVDS Transmitter 18-Bit Flat Panel Display Link-87.5 MHz

-Pin-to-pin compatible to DS90C363, DS90C363A and DS90C365

-No special start-up sequence required between clock/data and /PD pins. Input signals (clock and data) can be applied either before or after the device is powered.

- Support Spread Spectrum Clocking up to 100kHz frequency modulation & deviations of ±2.5% center spread or -5% down spread.