8inch TFT LCD AT080TN52 v.1 + تاچ مقاومتی

1. FPC Connector is used for the module electronics interface. The recommended
model is FH12A-50S-0.5SH manufactured by Hirose.
2. LED Light Bar Connector is used for the integral backlight system. The
recommended model is BHSR-02VS-1 manufactured by JST.

PIN Assignment

Pin No. Symbol I/O Function Remark
1 NC No connection
2 NC No connection
3 NC No connection
4 NC No connection
5 GND P Power ground
6 VCOM I Common voltage
7 VCC P Power for Digital circuit
8 MODE I DE/SYNC mode select Note3
9 DE I Data Input Enable
10 VS I Vertical Sync Input
11 HS I Horizontal Sync Input
12 B7 I Blue data(MSB)
13 B6 I Blue data
14 B5 I Blue data
15 B4 I Blue data
16 B3 I Blue data
17 B2 I Blue data
18 B1 I Blue data
19 B0 I Blue data(LSB)
20 G7 I Green data (MSB)
21 G6 I Green data
22 G5 I Green data
23 G4 I Green data
24 G3 I Green data
25 G2 I Green data
26 G1 I Green data
27 G0 I Green data (LSB)
28 R7 I Red data (MSB)
29 R6 I Red data
30 R5 I Red data

31 R4 I Red data
32 R3 I Red data
33 R2 I Red data
34 R1 I Red data
35 R0 I Red data (LSB)
36 GND P Power ground
37 DCLK I Sample clock
38 GND P Power ground
39 L/R I Right/ left selection Note2,5
40 U/D I Up/down selection Note2,5
41 VGH P Gate ON voltage
42 VGL P Gate OFF voltage
43 AVDD P Power for Analog circuit
44 RESET I Global reset pin. Note1
45 NC No connection
46 VCOM I Common voltage
47 DITHB I Dithering function Note 4
48 GND P Power ground
49 NC No connection
50 NC No connection